Vetus M3.28 Manuel de service télécharger pdf (Page 48)

54 Replacing heat exchanger

Replace the heat exchanger in the original

position in the heat exchanger housing.

Use new O-rings (61 x 2.5 mm) which

have been greased.

55 Replacing the end covers

Fit the end covers in the housing; the con-

nector cover is fitted with a locating pin

so that it can be fitted in one way only in

relation to the heat exchanger.

This ensures the correct position of the

separator baffle in the connector cover in

relation to the heat exchanger.

Tighten up the bolts when both covers are

in the correct position.

• Refitthedrainplug.

• Reconnect all hoses previously

removed.

• Refillthecoolingsystem,seepage43.

Cleaning the heat exchanger

4 Maintenance

VD00157 STM6202

o-r i n g , a r t .C o d e : StM6113 (2 x)

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Pas de commentaire

Vetus M3.28 Manuel de service Page 48