Vetus M3.28 Manuel de service télécharger pdf (Page 20)

Wa r N i N g

Never turn the key to the ‘s t a r t ’ posi-

tion while the engine is running.

Doing so will damage the starter

motor.

12 Starting

Now turn the key further to the ‘s t a r t ’

position.

Release the key as soon as the engine

fires (the key will return to the ‘

o N ’ posi-

tion) and throttle back.

Leave the key in this position while the

engine is running.

Check that the indicator lights for oil pres-

sure and alternator are off. Cooling water

should now flow out of the exhaust; if this

is not the case, stop the engine immedi-

ately. Before submitting the engine to full

load it should be brought up to operating

temperature as quickly as possible by

running at 3/4 of maximum revs.

N e v e r

turn the main switch off while the engine

is running.

The instrument panel is provided with the

following instruments (Depending of the

type of panel, see page 10).

3 Use

Starting

Wa r N i N g

Release the key if the engine does

not fire within 10 seconds. Wait until

the starter motor has stopped running

completely before turning the key to

the ‘

s t a r t ’position again. Never allow

the starter motor to run for more than

30 seconds consecutively.

VD00109

VD00110

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Pas de commentaire

Vetus M3.28 Manuel de service Page 20